Rockspace Extender Multi-device Setup [All You Need to Know]
Thinking about Rockspace extender multi-device setup? Well, it nothing but the number of devices that you can connect to the Rockspace extender’s network i.e. Rockspace_ext after setting it up. If we talk in digits, then it is possible to connect¬¬ 8 wireless clients to a single band Rockspace extender. On the other hand, the count increases to 32 client devices when it comes to offer WiFi connection via a dual-band range extender model. To be very precise, you will be able to connect 16 devices to the 2.4GHz network and 16 clients to the 5GHz network. But, for this multi-device setup, you need to make your extender up and running after connecting it to a host gateway. Read further to know.
What to Do for Rockspace Extender Multi-device Setup?
For Rockspace extender setup for multiple devices, it is necessary that your extender run on the default factory settings before its connection with the router. Therefore, you must reset the extender and then follow the steps highlighted below:
- Keep your Rockspace extender in the room where your host gateway is already placed.
- Power up the extender now.
- Have the extender’s Power and WiFi LEDs become solid? If yes, then move to the next step.
- Check all sides of your extender and look for the button labeled WPS.
- You now have to press the WPS button.
- Do the same thing with your host gateway.
- Just in case you are trying to configure your dual-band Rockspace extender, it is suggested that you press the WPS two times.
- The first time will finalize the 2.4 GHz network connection whereas the second push of the WPS buttons on both devices will extend the 5 GHz network.
The steps to do Rockspace extender multiple-device setup ends here. We suggest you follow these steps very carefully to avoid any inconvenience. After the whole setup thing ends, it is recommended that you connect your wireless client devices to the extended network Rockspace_ext.
How to Connect Multiple Devices to Rockspace Extender?
Considering that your range extender has been set up with the help of the aforementioned instructions, you are now free to connect your multiple clients to its network. Here’s what you need to do in order to connect your devices.
- Unlock your mobile phone or tablet.
- Swipe up/down to open the Notification or Status window.
- There, long press the WiFi icon.
- You will see a list of networks.
- Select the network name Rockspace_ext.
- Input the WiFi password and tap Connect.
The steps given above will help you connect your mobile phone or tablet to the network of your Rockspace extender. You can follow the same steps for your PC or laptop. However, you need to access the Network and Internet Settings there. If you want to manage your extender’s settings, it is recommended that you use the device connected to its network and access the Rockspace extender login page using the dedicated IP or web address.
Can’t Connect Devices after Rockspace Extender Multi-device Setup?
There are chances that you will not be able to connect your devices to the Rockspace extender after setting it up. If that is the scenario, it is suggested that you pay heed to the points highlighted below:
Restart the Extender: The problem can occur when the extender falls victim to a technical glitch. To fix it, you don’t need to make much effort. Just reboot the extender and see how things become easy for you.
Relocate the Extender: Perhaps, your Rockspace range extender is located at a place where it is struggling to propagate WiFi signals. Thus, you are advised to check its surroundings and verify that no WiFi interference-creating factors are present around your range extender.
Any device/object that influences the signal propagation process is known as an interference-creating factor. For example, microwave ovens, televisions, refrigerators, Bluetooth speakers, washing machines, baby monitors, mirrors, aquariums, etc.
The Concluding Words
The Rockspace extender multi-device setup guide ends here. It is anticipated that you’ve learned everything by heart and will follow the correct steps for the connection process. But, before we put closing sentences, we want to address an issue where only one device connects to the WiFi network of the Rockspace extender whereas others deny the connection.
If that case shows up, then there is a high possibility that all your wireless clients except one are present out of the range of the extender. Therefore, it is advised that you bring all your WiFi client devices a little closer to the extender. All of them must stay in the boundary line of the signals emitted by the range extender. And yes, do not commit the mistake of overloading the extender’s WiFi network.