Detailed Guide to Perform Rockspace WiFi Extender Setup
Rockspace wireless range extender is the best option if you are struggling with internet connectivity or short WiFi range issue. A wireless range extender helps to erase WiFi dead zone areas from your home by extending the existing network coverage. If you are also thinking of doing an extender setup but have no idea how to perform the Rockspace WiFi extender setup, no need to worry, though. You have reached the best place. Here, we’ll go over every possible way to set up the Rockspace WiFi range extender.
Methods to Set Up Rockspace WiFi Extender
The procedure to configure the wireless range extender is quite easy. Keep reading to discover different methods to set up Rockspace WiFi range extender.
Setup Through Web Portal
In this method, we will set up the Rockspace range extender by using the default web address. This method is also known as a manual method.
1. Power On Extender
Place your range extender near to the well-working power socket. Once done, insert the power adapter into the power socket and turn on the switch. Wait for a few seconds until the power LED turns on.
2. Connect WiFi Devices
Get an Ethernet cable, then attach your wireless range extender to the home router using it. Verify that the power connection is not slack in order to prevent any technical problems. Along with that, also check that the Ethernet cable is not defective. In case it is, replace it immediately with the new one.
3. Open Web Browser
Once a strong connection is made between wireless devices, turn on the client device and open the internet browser on it. You can preferany browser ( Chrome, Opera, Firefox, Brave, or Vivaldi) as per your device’s convenience.
Note: Be sure that your browser is upgraded to its latest version. Apart from this, clear all the junk files from the browser.
4. Access Web Page
As soon as you launch a browser, head over to the URL bar and enter the default web address i.e. re.rockspace.local in it. Once done, press the Enter key to proceed further. Just in case, the default web URL is not working, use the IP address to access the web page.
5. Enter Login Credentials
The moment you hit the Enter key, the Rockspace login window will display on the screen. Fill in the default username or password in the required fields and click on the Login button. Once you logged in, you will be directed to the dashboard of the Rockspace.
In this way, you can easily perform the Rockspace WiFi extender setup in a hassle-free way.
Setup Through WPS Button
You can install your Rockspace WiFi range extender using the WPS method just with a single push of a button. Walk through the given below steps to perform the wireless range extender setup using the WPS method:
- Insert your Rockspace range extender into the well-maintained power socket.
- Turn on the power button.
- Wait for a few seconds, till the LED light turns on.
- After that, look for the WPS button on your Rockspace extender.
- Once you find it press it carefully.
- Do the same thing with the host router i.e. find the WPS button and hold it for a few seconds.
- Wait for some time to sync the Rockspace extender with the home WiFi system.
Now, place your WiFi device to a location that has poor WiFi coverage. Just in case after the configuration, you are not able to access the login page, then reset the extender to its default settings. If you don’t know how to reset Rockspace WiFi extender then, follow the given below steps:
- Find the Reset button on the range extender.
- Once found, press it carefully for some time.
- Release it.
In the End
That’s it! We conclude our guide on how to perform the Rockspace WiFi extender setup. We believe that you found the aforementioned tips helpful and will be able to install the Rockspace wireless range extender in a trouble-free way. Did you like reading this article? Leave your feedback in yes or no via the comment section. Your feedback might be helpful to your fellow readers.